
712 reviews analysed
1. Facon 12" x 18" Holding Tank Heater Pad for RV Camper Trailer with Automatic Thermostat Control (Pack of 2)
Feature
- Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
- Pad Size: 12” x 18”, works efficiently up to 50 gallon holding tanks.
- Built in thermostat is set to turn itself on at 45°F( + – 5 degrees) and turn itself off at 68°F( + – 5 degrees). As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
- Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required. Reticular carbon fiber design provide heated evenly & efficiently.
- 2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire)
2. DERNORD 12V 300W DC Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting
Feature
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicone sealing washer which is flexible and waterproof
Description
Product Features
12V 300W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:300 watts
Item Weight:7.5 ounces
Product Diameter: 8mm
Tube length: 6.3 Inch
Screw Type:1”NPT
Color:White
3. DERNORD 12V 600W Immersion Heater Submersible Water Heater Element Stainless Steel Heating Element with 1 Inch NPT Fitting Double U Type
Feature
- 12v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Description
Product Features
12V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
→ Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
→ These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 12v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:12 volts
Wattage:600 watts
Item Weight:10.95 Ounces
Product Diameter: 8mm
Tube length: 170mm
Screw Type:1”NPT
Color:White
4. Facon 12" x 18" RV Tank Heater Pad, Up to 50 Gallons Fresh Water/Grey Water/Black Water Holding Tank Heating Pad with Automatic Thermostat Control, 12V DC
Feature
- Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Camper Trailer Mobile home in winter
- Genesis Lighting own the Patent and Certificate for this Heater Pad Products, Patent No.: US10257888B2. We are the only manufacturer for this product. Our registered Brand is” Facon”
- Simply turn “ON” the power switch when the outside temperature is near to freezing. Built-in Thermostat is Set to Turn Itself on at 45°F( + – 5 degrees) and Turn Itself off at 68°F( + – 5 degrees). Turn “OFF” the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use
- Pad size 12” x 18” works efficiently up to 50 gallon holding tanks(Fresh Water Tanks, Grey Water Tanks and Black Water Tanks). 3mm Foam Insulation Pad with self adhesive make it easy installation, no extra facility required
- Passed US Standard QAI Quality Certification. 2-Wires Design without plug- Convenience for fixed place installation. Connect to 12V DC power supply and RV power switch. Red Wire=Positive(+)
- White Wire=Negative(-)
5. Spardar Water Heating Cup for Car Double Wall Vacuum Insulated Stainless Steel Automatic Working Car Cigarette Lighter DC12V Electric Kettle Boil Water (Gray)
Feature
- ???? Food Grade Material – High-quality food grade 18/304 stainless steel on both inside and outside walls, scratching resistance, 100% BPA Free for heath-safety
- ???? Digital temperature display – Keeping warm by customize temperature freely any time, water can be quickly heated to boiling which only take 16 minutes
- ???? 348ML & Cup Capacity – Great for heat water inside the car, instant noodles making, coffe making, tea making, milk making and boiled eggs, meet your all needs
- ???? Convenience and Safety – Charging base is designed to be detachable in order to store and move conveniently, Boil and keep your water temperature while driving, perfect for outdoor car travel, you don’t worry without hot water to drink any more when you are in a long and hard journey
- ???? 100% Guarantee – In the unlikely event our cup warmer fail to meet or exceed your expectations, you are free to return them within the first 30 Days and receive a FULL refund of your purchases, any question please feel free contact us
6. DERNORD Cartridge Heater 12V 100W Electric Hot Rod Stainless Steel Heating Element Replacement
Feature
- Cartridge Heater 12v 100w
- Tube diameter: 8mm (0.32 Inch)
- Tube length: 100mm (3.94 Inch)
- Cartridge heaters is consist of a cylindrical stainless steel 304 tube and thus provide a high corrosion prevention
- Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc
Description
Product Features
12v 100W Cartridge Heater widely used for 3D printer
From the Manufacturer
The Dernord 12v 100w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.
Application
1: Boiling water because of flange
2: Patient Comfort heating used in medical devices
3: Mold die and platen heating
4: Seal bars used in packaging equipment
5: Heating of hot stamps
Technical Details
Tube length: 100mm
Tube diameter: 8mm
Wire length: 32cm
7. Facon 7 1/4"x25" Water Holding Tank Heater Pad for RV Motorhome Camper Trailer Boat with Automatic Thermostat Control 12V DC(Pack of 2)
Feature
- Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
- Reticular carbon fiber design provide heated evenly & efficiently.
- Built in thermostat is set to turn itself on at 45°F( + – 5 degrees) / 5? and turn itself off at 68°F( + – 5 degrees) / 20?. As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
- Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required.
- 2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire). The Model works efficiently up to 50 gallon holding tanks
8. Facon 7 1/4"x25" Steps and Water Holding Tank Heater Pad for RV Motorhome Camper Trailer Boat with Automatic Thermostat Control, Up to 50 Gallons Tank, 12V DC
Feature
- Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Camper Trailer Mobile home in winter
- Genesis Lighting own the Patent and Certificate for this Heater Pad Products, Patent No.: US10257888B2. We are the only manufacturer for this product. Our registered Brand is” Facon”
- Simply turn “ON” the power switch when the outside temperature is near to freezing. Built-in Thermostat is Set to Turn Itself on at 45°F( + – 5 degrees) and Turn Itself off at 68°F( + – 5 degrees). Turn “OFF” the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use
- Pad size 7 1/4” x 25” can be use as steps heater and works efficiently up to 50 gallon holding tanks(Fresh Water Tanks, Grey Water Tanks and Black Water Tanks). 3mm Foam Insulation Pad with self adhesive make it easy installation, no extra facility required
- Passed US Standard QAI Quality Certification. 2-Wires Design without plug- Convenience for fixed place installation. Connect to 12V DC power supply and RV power switch. Red Wire=Positive(+)
- White Wire=Negative(-)
9. Ovente CH112 Car Immersion Liquid Heater, 150W (12V), Compact, Portable, 1Piece, (CH1121B), 1 – Black
Feature
- KEEP YOUR BEVERAGES PIPING HOT – Have a cup of hot water for your coffee, tea, and cocoas any time you hit the road! Simply submerge the Ovente Car Immersion Liquid Heater CH1121 Series in the water, clip it onto the mug, and plug it in.
- HEATS UP IN A FLASH – This one runs on a powerful 150W (12V) motor. It is energy-saving, and it heats up a cup of liquids in just a minute! It won’t drain too much power from your car batteries. This package comes with two heaters, doubling the time you save for boiling water.
- TRAVEL-FRIENDLY & MULTIFUNCTIONAL – This one is handy and super lightweight (2.4 oz), making it perfect for travels and road trips. Plus, it works on any liquid with water-like consistency like tea, coffee, and soup broths.
- QUALITY YOU CAN VOUCH FOR – This car electric immersion liquid heater is made of stainless steel and heavy-duty plastic. The plastic won’t easily warp or melt and the steel won’t rust even after years of use.
- LIMITED 1-YEAR WARRANTY – All Ovente products have a one (1) year warranty period from the date of purchase from an authorized retailer. This warranty only covers defects in workmanship and materials. Please note that you have to provide proof of purchase to request for repair or replacement
Description
Your powerful kettle minus the bulk
take your time: Enjoy your early morning newspaper read and hot cup of Coffee without rush through Ovente car electric immersion liquid heater CH1121 series! With this handy tool, you do not have to get up and reheat your beverages in a microwave. Just bring your to-go mug with your beverage. Then, immerse the electric heater to keep your drink hot, clip it onto your cup, and plug it in! Unplug when it reaches your desired temperature. Remember to wait at least 15 seconds before you remove the tool from the Liquid.
for other liquids
you can use this one to heat other food and beverages other than water, such as teas, coffees, and soup broths. Note that this is recommended for heating liquids with thin, water-like consistency only, not for thick mixtures or fluids.
this heater is made of stainless steel and heavy-duty plastic. The plastic won’t easily warp or Melt and the steel won’t rust even after years of use. 150W (12V): heats up fast
weight: 2.4 oz
stainless steel> Heavy-duty plastic
compact and lightweight
caution: always submerge in water before plugging and unplugging.
10. TekkPerry Auto Car Cup Warmer Cooler,Portable Smart 2 in 1 Heating Cooling Cup Can Drinks Holder DC 12V 3A for Water Coffee Milk Beverage for Traveler Road Tripper Outdoors (With Display 1)
Feature
- Perfect design –❤ 2 in 1 functions allow the product to cool or warm your drink or beverage. With cooling down to -3℃ and heating up to 60℃ your beverage will cool down or warm up in minutes. You can cooling or heating your drinks by switching the different button and then waiting for it to work.
- Environmentally Materials–❤ The car cooling heating cup holder adopts ABS+ environmentally friendly aluminum material, simple design, easy to use with one-key refrigeratio and one-button heating. It is appllicable to use of DC-12V a vehicle-mounted power supply and household adapter.
- HOW TO WORK–❤ The air cooler on the accompanying cup adopts a new turbo fan system with four activated heaters inside, which enable the cold air or warm air to flow effectively, and easily create low temperature or high temperature inside the cup to achieve rapidly cooling and heating.
- Wide Compatibility–❤ : Suitable for heating various materials like aluminum, iron, plastic, glass, etc. Among the conductive media, aluminum is more conductive, followed by steel, iron, glass, and plastic.
- PLEASE NOTE–❤: This product cann’t reduce the temperature of the beverage to 5℃ or heat to 55℃ in a short time (3-5 minutes). What we offer you is a long time (such as a day) to keep the beverage at about 5℃ or about 55℃. It takes about 30 minutes for the beverage to heat up or cool down, after which it can be kept at the temperature you need.
Conclusion
By our suggestions above, we hope that you can found 12Volt Dc Water Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!