711 reviews analysed
1. 14"w X 6"h Adjustable AIR Supply Diffuser – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 15.75"w X 7.75"h]
Feature
- 14″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 15.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- High Quality Steel Construction, No Scuff Powder Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front – Easy Unrestricted Air Flow Deflection For Your HVAC System
Description
14″w X 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 15.75″w X 7.75″h]
14″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 15.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
2. Duct Connector Flange, Plastic Straight Pipe Flange for Heating Cooling Ventilation System (6” Inch Round)
Feature
- ” Inch Duct Connector is make of high quality ABS,compact and solid.
- White, simple and stylish // ABS Plastic rigid ducting is perfect for DIY and Trade use.
- Easy to install, compatible with 5 Inch tube
- Perfectly suited for ducting your Tumble Dryer, Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, or Cooker Hood
- We always provides you with premium equipments and service.30-day money-back guarantee
Description
Quick solution for easily connecting your ducting to your wall, floor, ceiling opening or dryer vent hose flange mounting flange for trouble-free, air-tight installation Easy to install, compatible with Inch tube vent pipe cap Best compatible with other REPA MARKET hvac parts. We always provide you with premium equipments and service for home improvement SM:cover insulation fan hood flex flexible collar plate insulated self cut system indoor duct vent pipe cap dryer exhaust damper cap roof seal house idealair outlet insulation pads dryer conditioner fittings heat adhesive range gasket pipe kit insulation vent
3. 6"w X 6"h Steel Return Air Grilles – Sidewall and Ceiling – HVAC Duct Cover – White [Outer Dimensions: 7.75"w X 7.75"h]
Feature
- 6″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 7.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall
- QUALITY PACKAGING – Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
- HEAVY STEEL CONSTRUCTION – No Scuff Powder Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- UNRESTRICTED AIRFLOW For Your HVAC System – 50° Angled To Provide Maximum Airflow – ½ Inch Spaced Fins
4. AC Infinity CLOUDLINE S6, Quiet 6” Inline Duct Fan with Speed Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
Feature
- Designed to quietly ventilate grow tents, transfer heating/cooling to rooms, circulate air, exhaust odors, and cool AV racks.
- Features an inline speed controller utilizing PWM which can precisely optimize the fan’s speed without generating noise.
- Mixed flow design combined with a DC-powered motor for a truly quiet and energy efficient performance.
- Kit also includes corded AC power adapter, installation manual, and all necessary mounting hardware.
- Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 351 CFM | Noise: 32 dBA | Bearings: Dual Ball
Description
Inline Duct Booster Fan
The duct fan system is designed to quietly cool AV equipment rooms and closets, and to ventilate various air circulation and exhaust projects. Features an inline speed controller utilizing PWM-technology. Contains a mixed-flow design and DC-motor for a quiet and high static-pressure performance. The motor box containing the fan’s impeller and blades can be detached from the mounted frame for easy cleaning and maintenance. Complete kit includes one duct fan unit, one inline speed controller, installation manual, all necessary mounting hardware, and a corded AC plug adapter to power the unit through a standard outlet.
Precise Speed Controller
The inline speed controller enables you to set the duct fan’s speed to optimal noise and airflow levels for various environments. Unlike common AC-powered duct fans that suppresses voltage to control fan speeds, this duct fan features a DC-motor that is precisely controlled using PWM (Pulse Width Modulation). This technology enables the fan’s motor to be able to run smoothly at extremely low RPM speeds without generating motor noises and heat as seen on variable voltage controllers. Eight speed options are available with power switch, and backup memory. This S6 model can be connected to the smart controller of the CLOUDLINE T6 (AI-CLT6) model to share the same programming and power source.
Quiet and Energy Efficient Design
The inline fan features a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
5. AC Infinity CLOUDLINE T6, Quiet 6” Inline Duct Fan with Temperature Humidity Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
Feature
- Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
- Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
- Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance.
- Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
- Duct Size: 6” | Dimensions: 7.9 x 12.6 x 8.4 in. | Airflow: 351 CFM | Noise: 32 dBA | Bearings: Dual Ball
Description
Inline Duct Booster Fan
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an DC-motor with PWM-control for a quiet and energy efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and a corded AC plug adapter.
Intelligent Controller
The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously, or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features includes a countdown timer, alarm system, and eco-mode. Includes detachable 12-foot precision probe that is water resistant. Can connect to an additional CLOUDLINE S6 fan to share the same programming and power source.
Quiet and Energy Efficient Design
Features an DC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
6. Duct Connector Flange, Plastic Straight Pipe Flange for Heating Cooling Ventilation System (6” Inch Rectangle)
Feature
- ” Inch Duct Connector is make of high quality ABS,compact and solid.
- White, simple and stylish // ABS Plastic rigid ducting is perfect for DIY and Trade use.
- Easy to install, compatible with 5 Inch tube
- Perfectly suited for ducting your Tumble Dryer, Bathroom or Kitchen extractor fan, Hydroponics, In-Line Extract Fans, or Cooker Hood
- We always provides you with premium equipments and service.30-day money-back guarantee
Description
Quick solution for easily connecting your ducting to your wall, floor, ceiling opening or dryer vent hose flange mounting flange for trouble-free, air-tight installation Easy to install, compatible with Inch tube vent pipe cap Best compatible with other REPA MARKET hvac parts. We always provide you with premium equipments and service for home improvement SM:cover insulation fan hood flex flexible collar plate insulated self cut system indoor duct vent pipe cap dryer exhaust damper cap roof seal house idealair outlet insulation pads dryer conditioner fittings heat adhesive range gasket pipe kit insulation vent
7. 6" Air Duct – 8 FT Long, Black Flexible Ducting with 2 Clamps, 4 Layer HVAC Ventilation Air Hose – Great for Grow Tents, Dryer Rooms, House Vent Register Lines
Feature
- 6″ DUCTING LIGHTPROOF: We made this aluminum duct with your Grow Room needs in mind. Thick layer of Black PVC on this ducting prevents light leaks. Works with exhaust and intake fans, carbon filters and hooded lights which are 6″ in diameter
- 4-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. Under the White PVC layer our ducting is built with 2 layers of Aluminum Foil With a layer of PET and Steel Wire Helix to preserve the shape
- FLEXIBLE AND EASY TO USE: Our 6 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 6 Inch Clamps to make the installation a breeze
- 6″ DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 6 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife
- VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications you have in mind
8. AC Infinity Flexible 4-Inch Aluminum Ducting, Heavy-Duty Four-Layer Protection, 25-Feet Long for Heating Cooling Ventilation and Exhaust
Feature
- Designed for ventilation applications including HVAC, dryer, grow rooms and tents.
- Four layer design makes it more durable and resistant to leaks, tears, and cuts.
- Steel-wire spiral structure is flexible and easy-to-install in hard to reach places.
- Constructed of Aluminum and thermoplastic, tube can be shortened for various applications.
- Ducting Size: 4” | Length: 25 feet | Includes two stainless steel 4″ duct clamps
Description
Product Description
This ducting was designed for various ventilation, circulation, and heating/cooling transfer applications. It features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is a heavy-duty dual aluminum foil that is fire/flame resistant. While the outer layer is made of dual PVC thermoplastic that protects the aluminum from cuts and tears, while stopping leakage. The ducting are held together by an internal steel-wire spiral that is flexible and easy-to-install in hard to reach places. The ducting can be shorted but cutting the tube, to fit various applications. Includes two stainless steel duct clamps.
Applications
Used in conjunction with a duct fan system for various air circulation and ventilation projects including hydroponic grow rooms and tents, exhausting bathrooms and attics, transporting heating and cooling, and other installations. It is also used in the cooling of AV equipment rooms, closets, racks, and cabinets.
9. 6" Round Ceiling Diffuser – Easy Air Flow – HVAC Duct [White]
Description
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren?t readily apparent, but you will appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
Easy Unrestricted Air Flow For Your HVAC System
10. Syurund Aluminum Air Ducting for HVAC Ventilation, Dryer Vent, 4 Inch x 6 Feet Flexible Air Duct for Heating and Cooling Ventilation and Exhaust
Feature
- Ducting Material: High-quality aluminum (High Temperature Resistant & Corrosion Resistant & Long Lasting)
- Clamps Material: Stainless steel (Rustproof & Corrosion Resistant & Heavy Duty).
- Ducting Feature 1: Three-layer Thickness (Aluminum Foil + Aluminum Foil + bulit-in Wire Helix): Flame-retardant coating. Thermal Endurance: Temperature range from -22 to 266 Fahrenheit.
- Ducting Feature 2: Built-in steel wire for reinforcement and long lasting performance.
- Ducting Feature 3: Flexible length for exhaust fan blower / inline fan
- quick and easy to set up.
- Application Scenarios: Perfect for Heating Ventilation & Air Conditioning (HVAC), Kitchens, Bathrooms, Greenhouses, Grow Rooms, Grow Tents, etc.
Description
Ideal for Heating Ventilation & Air Conditioning (HVAC), Kitchens, Bathrooms, Greenhouses, Grow Rooms, Grow Tents, etc.
- Two-layer thickness
- Flexible length, easy to set up
- Built-in steel wire for reinforcement and long lasting performance
- Can be used in many scenarios and for multiple purposes
Application Scenarios:
- Grow Tent
- Grow Rooms
- Greenhouses
- Kitchen
- Bathroom
Promise:
We provide you with comprehensive after-sales service. If you are dissatisfied with our aluminum air ducting foil you ordered, please send us an email and we will provide you with a replacement or return service, so that you have no worries.
Conclusion
By our suggestions above, we hope that you can found 6 Heating Ducts for you.Please don’t forget to share your experience by comment in this post. Thank you!