663 reviews analysed
1. Siemens QF120A Ground Fault Circuit Interrupter, 20 Amp, 1 Pole, 120V, 10,000 AIC
Description
Testing GFCIs and afcis on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that afci/GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self test & lockout feature enables the dual function circuit breaker to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground/arc fault. This effortless system guarantees that only the best protection is given to your home at all times.
2. Murray MP220GFA 20 Amp 2-Pole GFCI Circuit Breaker with Self Test & Lockout Feature
Description
Murray ground fault circuit Interrupters (GFCI) breakers are designed to protect personnel from dangerous electrical current. The GFCI circuit breaker will de-energize the circuit when current is flowing along an unintended path such as water. This breaker is intended to protect areas of the home such as the kitchen, bathroom or laundry room where electrical appliances or products might come into contact with water
3. Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
Description
Product Description
Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed
From the Manufacturer
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
4. Q220 20-Amp Double Pole Type QP Circuit Breaker
Feature
- na
- Imported
- Double pole, 20 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Description
Product Description
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.
5. UBIP120-New Pushmatic P120 Replacement. One Pole 20 Amp Circuit Breaker Manufactured by Connecticut Electric.
Feature
- Replacement Pushmatic circuit breaker manufactured new by Connecticut Electric
- For use in Pushmatic circuit breaker panels
- Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers
- 10,000 AIC
- 20 Amp
- 120 VAC 1 Pole breaker
- Bolt on type
- May also be branded as Bulldog (ie Bulldog P120)
Description
Product Description
Connecticut Electric manufactures new high quality replacement circuit breakers for Pushmatic load center that accept Pushmatic style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers, never used or refurbished ones.
From the Manufacturer
This 120-Volt ITE pushmatic 20 amp, single pole replacement circuit breaker is used in a pushmatic load center. Typical applications, up to 2,200-Watt, include kitchen circuits, branch circuits, wall receptacles, electric heaters (up to 1,650-Watt), dishwashers, refrigerators, freezers, washing machines, window air conditioners (110-Volt, up to 5,500 BTU) and electric motors (3/4-to-1-1/4-Horsepower). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.
6. UBIP230-New PushmaticP230 Replacement.Two Pole 30 Amp Circuit Breaker Manufactured by Connecticut Electric.
Feature
- Replacement Pushmatic circuit breaker manufactured new by Connecticut Electric
- For use in Pushmatic circuit breaker panels
- Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers
- 10,000 AIC
- 30 Amp
- 120/240 VAC 2 Pole breaker
- Bolt on type
- May also be branded as Bulldog (ie Bulldog P230)
7. UBIZ2100- Zinsco QC100 Replacement.Two Pole 100 Amp Thick Series Manufactured by Connecticut Electric.
Feature
- Replacement Zinsco circuit breaker manufactured new by Connecticut Electric
- For use in Zinsco circuit breaker panels
- Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers
- 10,000 AIC
- 100 Amp
- 120/240 VAC 2 Pole breaker in a 1 1/2″ body
- Plug in type
- May also be branded as Sylvania (ie Sylvania QC100)
Description
Product Description
Connecticut Electric manufactures new high quality replacement circuit breakers for Zinsco load centers that accept Zinsco QC style circuit breakers. Circuit breakers should only be replaced with new tested and Safety Agency Listed circuit breakers, never used or refurbished ones.
From the Manufacturer
This 120/240 volt Zinsco 100 amp, double pole, thick series replacement circuit breaker is used in a Zinsco load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.
8. Square D by Schneider Electric QO2020CP QO 2-20-Amp Single-Pole Tandem Circuit Breaker
Feature
- Square D QO
- 20A Single Pole Tandem Circuit Breaker
- 1/2 Space Per Pole
- 120/240V, For Older Model Load Centers Without Pan Rail Slots
- QO 2-20 Amp one-pole tandem replacement circuit breaker
- Offers 2 poles in the space of 1 as the replacement breaker is for use in old-style, non-class CTL QO load centers and has a maximum load of 240 volts
- The breaker features Qwik-Open and a Visi-Trip indicator to easily identify a tripped breaker
- Trip thermally (in an overload situation) or magnetically (under a short circuit situation)
- Quick make – quick break mechanism
Description
Square D by Schneider Electric Square D QO, 20A Single Pole Tandem Circuit Breaker, 1/2 Space Per Pole, 120/240V, For Older Model Load Centers Without Pan Rail Slots, Bulk.
9. SIEMENS Q22030CT 30 Double Two 20-Amp Single Pole Circuit Breaker, As shown in the image
Description
Product Description
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The triplex breakers provide two single pole and one double pole breakers in half the space. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.
From the Manufacturer
SIEMENS space saving, plug in circuit breakers are intended for use in SIEMENS EQ, SIEMENS Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a SIEMENS panel is not voided, the use of SIEMENS breakers is required. The triplex breakers provide two single pole and one double pole breakers in half the space. These triplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.
10. Q290 90-Amp Double Pole Type QP Circuit Breaker
Feature
- na
- Made in USA or Imported
- Double pole, 90 Amp, 240V type QP Circuit Breaker
- 10,000 AIC interrupting rating
- Siemens type QP circuit breakers provide easy plug-in connections in Siemens enclosures and the time saving insta-wire feature
- Compatible with Siemens PL and ES series load centers
- Use for overload and short-circuit protection of your electrical system
Conclusion
By our suggestions above, we hope that you can found Ge Circuit Breaker 20 Amp Twin for you.Please don’t forget to share your experience by comment in this post. Thank you!