580 reviews analysed
1. Hygger 500W 300W Digital Quartz Aquarium Heater, Fast Heating Submersible Thermostat for Fish Tank 30-120 Gallon, with External IC Thermostat Controller and Thermometer
Feature
- ????【Fast Heating Up】voltage 110-120V/60HZ, power 500W, US three-pin plug, heater rod length 10.5 inch, 500W submersible heater for fish tank 60-120 Gallon. The heater power cord is 6ft, the controller power cord is 5ft, the thermometer cord is 4.6ft. Temp range: 61-90℉. Fast heating up aquarium heater, it takes about 3 minutes to heat 3.5 gallon water up 3℉
- ????【Fully Automatic Control】very easy and reliable to use. After finishing the temperature setting, the fish tank heater will run automatically by itself. It will stop heating when the water temp reaches to the set temp, please note that the water temp may go up 1℉ more because of the waste heat. When the water temp is cool down to 1℉ less than the set temp, the tank heater will restart heating
- ????【Quartz Tube & Plastic Guard】With high-quality quartz glass tube, it’s very durable and explosion-proof, this fish tank heater can be used for saltwater and freshwater aquariums, service life can be 3 years or more. With low profile black plastic guard, easy to hide in the tank. The guard can prevent your aquarium pets from burned, the gaps on the guard is about 3mm, no worries for fish stuck
- ????【Digital LED Display Controller】the external IC temp controller can show the water temp with 2 blue LED digits. Only show Fahrenheit degrees. To set the temp, just press the button over and over until the screen displaying the temp you desired, then stop and wait the digit flashing for 3 times, the setting is done and the led shows the current water temp again. The controller is connect with separate sensitive thermometer
- ????【Fully submersible Aquarium Heater】with strong suction cups on the heater guard and the thermometer, it’s easy to install the aquarium heater no to the tank walls or bottom, please keep them fully submerged. The thermometer should be away from the heater and keep water circulation as far as possible
2. Heating Thermostat Aquarium Probe Sensor Inkbird ITC-306T Heater Temperature Controller Pre-Wired Dual Stage Timer Time Switch ONLY HEAT Outlet AC 100~240V 1200W NO Cooling
Feature
- ONLY heating outlet aquarium sensor heater for aquarium, reptile.
- It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the needs of aquarium.
- This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control.
- The temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- ℃ / ℉ Display can be chosen. Temperature calibration
- Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
Description
Features:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-58 ~ 160° F)
Temperature Control Mode: On/Off Control, Heating, No cooling control
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Relay Contact Capacity: Heating (10A, 100-240VAC)
Sensor Type: aquarium sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature:-20~ 60 ° C / -4~ 140 ° F
Humidity:20~85% (No Condensate)
Dimension:
Body:140x68x33mm (5.5×2.7×1.3 inch.)
Socket:85x42x24mm (3.3×1.7×1 inch.)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
NET Weight: About 0.35kg (0.77lb)
Temperature calibration
Over-temperature and sensor fault alarm
Warranty: 1 Year
Package Content:
1x Temperature controller ITC-306T with Aquarium Probe
1x Manual
3. Hygger Titanium Aquarium Heater for Salt Water and Fresh Water, Digital Submersible Heater with External IC Thermostat Controller and Thermometer, for Fish Tank 5-120 Gal
Feature
- ????【For Fish Tank 20-45 Gallon】voltage 110-120V, power 200W, heater rod length 10.7inch. The heater and controller power cords are the same length 5.5ft, the thermometer cord is 4.4ft. There are mounting holes on the temp controller back for hanging on the wall
- ????【Fully Automatic Control】very easy and reliable to use. After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, it will stop heating when the water temp reaches to the set temp, it will automatically restart heating when the water temp is 1℉ less than the set temp. The controller has temp setting remember function
- ????【Durable Titanium Tube】this seawater resistant titanium aquarium heater is good for use in salt water and fresh water, service life can be 3 years or more. Very compact small, easy to hide in the tank. Don’t suggest to use it in sump. The diameter of the titanium tube is19mm, you can buy suction cups suitable for this size when you need to get that replaced.
- ????【Digital LED Display】the IC temp controller can show the water temp and set temp at the same time, and there is a indicator light to show the heating status. You can press the ‘up’ key to shift degree unit between Celsius and Fahrenheit
- ????【Wide Temperature Range】With the thermostat controller you can set the temp from 32℉to 104℉, control precision is 1℉, please set the right temp for your aquarium pets. The separate thermometer can detect a temperature from -68℉ to 140℉, the measurement accuracy is 0.2℉ plus or minus, very sensitive
4. Inkbird ITC308S Temperature Controller for Aquarium with Submersible Probe, Heating Cooling Outlets Thermostat for Heater and Cooling Fans
Feature
- Temperature Control Mode: On/Off Control. Cooling and Heating control.
- Fully submersible probe. Aquarium probe works better in water than standard probe.
- Temperature calibration
- Over-temperature and sensor fault alarm. Dual display window, be able to display measured temperature and set temperature at the same time.
- Maximum output load: 1200W (110V).
- It’s an all in one, simple solution providing control of cooling and heating.
Description
Specification:
Temperature Control Range: -50~120 °C / -58~248 ° F
Temperature Resolution: 0.1°C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±2°F (-58~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x Temperature controller ITC-308S with Aquarium Probe
1x Manual
5. Inkbird 1200 Watts Digital Temperature Controller Aquarium Thermostat for Aquarium Heater, with Waterproof Sensor
Feature
- Wifi & Free APP ????: Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the APP, the app will push notifications to remind you.(APP: ☞InkbirdSmart)
- Dual Protection ????: The wifi temperature controller is equipped with 2 relays(current relay) to ensure that the power can be turned off under any abnormal circumstances, will protect your fish from being hurt by overheated water
- Continous Heating Alarm ????The heating time can be set according to your needs from 1 hour to 72 hours. The controller will alarm once the water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉ and the measure temperature range is -40℃~100℃/-40℉~212℉.
- Easy to use ????: Plug and Play. The 10A 1200w programmable and prewired aquarium thermostat is compatible with most kinds of heaters, no need to assemble the product yourself, just plug and play.
- Dual probe for safety ????:The aquarium heater controller will alarm once the temperature difference between 2 probes is more than 5℉(3℃), and the app will push a notification at the same time.To protect your fish in a more safet environment
Description
Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Sensor Length: 2m / 6.56ft
6. Aquarium Water Chiller&Heater 9Gal Fish Tank Cooling&Heating System 20-30℃ for Water Grass/Crystal/Shrimp/Jellyfish/Coral (9Gal/35L, 20-30℃)
Feature
- ???? Capacity: The aquarium cooler is suitable for single cylinder refrigeration below 35L/9Gal.
- ???? Temperature monitoring: Real-time monitoring of water temperature
- automatic constant temperature.
- ???? Installation: used in conjunction with a filter bucket or a water pump.
- ???? Noiseless: cooling without noise, suitable for house use.
- ???? Environmentally Friendly: It uses electronic refrigeration technology without emissions.
Description
YJINGRUI Aquarium Water Chiller Fish Tank Refrigerator for Water Grass/Crystal/Shrimp/Jellyfish/Coral
Technical Parameter
Voltage: 110-220V/50-60Hz
Power: 72W/100W
Temperature setting range: 10-40℃
Applicable water pipe: water pipe with inner diameter of 8mm
Suitable for water flow: 1-3L/min
Suitable for lift: less than 3m
Power cord length: 1.5m
Temperature control probe line length: 1.8m
Dimensions: 11*11*20CM
GW/NW: 1.98kg/ 1.56kg
Instructions
It should be used in conjunction with a filter bucket or a water pump and installed directly in the middle of the water pipe circulating in the water flow.
Precautions
1. Please transport carefully, transport, install, maintain, etc.
2. Keep the machine and the surrounding space at a distance of more than 10cm to facilitate airflow and heat dissipation.
7. KETOTEK KT4000 Digital Temperature Controller Outlet Thermostat, 2 Stage Heating and Cooling Mode US Plug 1100W with Sensor for Homebrew, Aquarium, Incubator, Pet Breeding, Reptiles
Feature
- DUAL RELAY OUTPUT AND TWO TEMPERATURE SETPOINT. Can be connected with refrigeration and heating equipment at the same time. One setpoint for heating and one for cooling. Automatic conversion of cooling and heating. Maximum output load 1100W ( 110V)
- BLUE BACK LIGHT LCD SCREEN WITH EXTRA SMALL ICONS DISPLAYING. Display can be saw clearly at night or under strong light. And the working state of temperature controller can be clearly known that it is heating, cooling, temperature alarming or none.
- GREAT SENSOR WITH HIGH SENSITIVITY UNDER 1℉ ACCURACY. It can quickly identify the real-time temperature, no matter temperature is in rising or dropping, for reducing accumulated temperature error after equipment stopped. The thermostat sensor is waterproof and made from plastic, it can work well in humid conditions without rusting.
- SECURE POWER CABLE. Double insulated wire with pure copper core and anti-flaming insulator, it is hard to be hot, safe and durable.
- USEFUL ADDITIONAL FUNCTIONS. Temperature calibration, cooling delayed, over-temperature and sensor fault alarm. To avoid displaying the wrong temperature, refrigerator damaged and temperature exceeded.
8. 500W 800W Aquarium Heater, Submersible Fish Tank Water Heater with External Color LED Digital Temperature Controller,PTC Ceramic Frequency Conversion Fast Heating for 60~180 Gallon
Feature
- ????LED DIGITAL DISPLAY CONTROLLER: ① Displays real-time water temperature or set temperature, three-digit display, water temperature display accurate to 0.1 °F, easy to read. ② 4 kinds of work instructions – Working/Malfunction/ Thermostatic/ Out of water, easy to understand. ③ Child Lock”KEY”: need to touch 3 seconds to set the temperature.
- ????RAPID HEATING: Fastest 5 seconds warming, with intelligent circuit board, work with new PTC ceramic thermal conductive material, the outside is wrapped with aluminum material to accelerate heat conduction and protection. Automatically reduces power when approaching the set temperature, fully utilizes thermal energy inertia to smoothly reach the set temperature, saving energy.
- ????INTELLIGENT THERMOSTAT: Over-temperature protection prevents “cooking fish”. When the water temp exceeds about 93.5 °F, start alternately flashing EE fault code
- and over 97℉, the heater will stop heating automatically. When the water temp cool down to 93℉, the heater will start working automatically. In addition, it has a power-off memory function and no need to set it again.
- ????ANTI-DRY PROTECTION: When the heating rod is exposed to air, display ER fault code and the heater will shut off automatically. When the heating rod is completely immersed in water, it will start working automatically. Effectively extend the service life. (PS: Suitable for freshwater only.)
- ????HIGH-QUALITY MATERIALS: Built-in dual temperature probe, real-time monitoring of water temperature, temperature accuracy of ± 1 °F
- high temperature resistant ABS material, no deformation and no softening, explosion-proof and anti-corrosion, no leakage of electricity. Strong suction cup bracket, can stably fix the heater in every corner of the fish tank.
Description
????The outer casing is made of ABS material, which and can withstand certain gravity, effectively preventing damage caused by fish.
???? Excellent heat dissipation, surface hollowing design, can quickly dissipate heat into the water.
????Three-digit digital display, accurate to 0.1 °F, easy to grasp the temperature value and working status.
????Double temperature probe prevents the single temperature probe from being damaged and causing no heating or over temperature.
???? After the water evaporates, the heater is exposed to the water surface, it will automatically cut off the electricity.
????Over-temperature protection system, when the temperature in the tank is over 97 °F will stop heating, to avoid fish from boiling fish due to high temperature.
⏲Automatically remember the temperature, when used after power failure, the temperature no need to set.
☀Through the frequency conversion heating technology, and PTC ceramic materials, it can fully convert electric energy into heat energy, saving energy and safety.
Specification:
Power:500 Watt
Voltage: 110V-120V, 60HZ
Power cord length: 5ft+5ft
Temp Control Range: 70℉~94℉
Application: 60-120 gallon
Note:
1. When using this heating, the heating should be submersible in the water and should not be exposed to the water surface.
2. It is necessary to regularly clean and clean the heating plate. If the heating plate is attached with impurities, the heating efficiency will be reduced.
3. When the aluminum plate inside the heating plate is damaged, please stop using it.
4. Can not be used for saltwater and water with special materials.
9. Tikaton Reptile Heat Pad – Temperature Adjustable Under Tank Heater for 10-20gal/30-40gal Tank, Terrarium Heat Mat for Turtle/Snake/Lizard/Frog/Spider/Plant Box
Feature
- UPGRADED DESIGN: Temperature can be adjusted manually. POWERFUL FUNCTION: Helps reptile for daily activity, appetite and metabolism. It can keep reptile tank warm without any harm to your pets and also won’t disturb animals sleep pattern.
- Durable material: made of high quality PVC material, its soft surface can be flexible and folded. The heat mat is easy to clean, convenient to use and low energy.
- ENERGY-SAVING: This heater uses a solid state nichrome heating element Which only use 8 watts of electricity and costs only pennies a day to operate. HIGH EFFICIENCY: High-quality heating wire heating, stable performance and long service life.
- ATTENTION: Before using double-side tape to fix the tank, you must connect the power to let the surfaces of heating pad will be smooth so that paste better 3M sticker.
- APPLICATIONS: Ideal heat source for desert and tropical species of reptiles, amphibians and arachnids.
Description
Parameter:
Rated Voltage: 120V
Waterproof: IPX67
Frequency: 60Hz
Package included: 1* Reptile Heat Pad, 1* 3M adhesive paper
S: 6 x 8 inches, 120V, 8W L: 8x 12 inches, 120V, 16W
How to attach double-sided 3M adhesive:
1. Lie heat pad on flat surface.
2. Turn on the heat pad
3. As pad heats, the pad will become smoother and flatter which will make it easier to apply the 3M adhesive.
How to adjust the temperature of the pad:
Rotate the switch clockwise to turn on, then continue rotating clockwise to adjust temperature from low to high. Then rotate the switch counter clockwise to turn off.
HELPFUL HINTS:
1. When securing heat pad to terrarium make sure it is placed so that reptiles will not have direct contact with the heat pad.
2. For indoor use only.
3. Placing terrariums with an under-tank heat pad on household furniture may cause the furniture’s finish to discolor. Tikaton recommends using a terrarium stand.
4. For use on glass terrariums only. Do not use on wood, plastic, acrylic or any other type terrarium.
Note: The heating temperature of the pad will be affected by the environment, best results are obtained at a room temperature of about 68-86°F (20~30 °C) in winter and less than 113°F (45°C) in summer.
10. WUHOSTAM 20W 16.53 Inch x 11 Inch Reptile Heating Pad Warmer with Temperature Controller, Power Adjustment Under Tank Terrarium Heater Heat Mat for Pets, Small Animals
Feature
- Highly recommend using this product with a thermostat.And please set the temperature probe closest to the heating pad.
- Power: 110V 20W, Material : PVC, Color : Black.Low wattage heater provide ideal heat for reptile and amphibians
- US Standard Plug and voltage,no adapter needed
- Water proof and moisture proof designed, but please don’t use it in water
- Keep reptile tank or vivarium warm without any harm to your pets
Conclusion
By our suggestions above, we hope that you can found Aquiriium Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!
