The #99702 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also included is an installed knit hose sock, which saves your furniture and furnishings from the wear and tear of the hose.

The 99713 is designed to provide superior airflow in a lightweight design to address the two features most desired in a central vacuum on/off control hose. The 360 degree swivel handle is designed to reduce kinking, stress on the hose, and stress on you as the user by relaxing any tension in the hose as you move through the room. The 35 foot length provides extra reach and insure there is sufficient length to prevent tugging and pulling to reach to the corner of the room. The installed hose sock is designed to reduce the possibility of marking walls, floor, or furnishings while also avoiding wear to doorframes and chair legs. The hose is compatible with industry standard central vacuum inlets including Nutone branded valves equipped with low voltage contacts in the opening of the inlet valve. You can confirm suitability by putting your finger into the hose opening and confirming there are two low voltage contacts on the upper surface of the opening. No need for concern as these contacts are low volt and will not harm you in any fashion. The 99713 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands.

The 1.25″ (32mm) 99878 crush proof triflex vacuum hose is ideal for commercial and domestic vacuum applications including dry, wet-dry, central vacuums, extraction equipment and as a general use vacuum hose demanding excellent flexibility and a smooth interior for superior air flow. The 99878 hose accepts standard threaded vinyl cuffs and bent ends making it immediately compatible with commercial vacuum equipment, central vacuum inlets and standard vacuum wands metal and plastic. This triflex hose is orange in color.

The 92014 is designed to answer one of the principal issues with canister or upright vacuums – How do I vacuum difficult to reach spaces like stairs or elevated surfaces without having to lug the vacuum? Carrying a vacuum onto stairs and balancing it why you try to clean the risers isn’t safe. The 92014 allows you to leave the vacuum at the base of the stairs and clean a normal set of stairs without having to move the vacuum or risk it falling down the stairs. Unlike stretch hoses which extend a spring of wire in the hose that pulls back the more it is ex­tended the 92014 is a traditional hose that won’t add resistance when fully extended. You also avoid the risk of a stretch hose slipping from your hand collapsing down the stairs damaging walls, floors, or worse. It is a simple, reliable solution to an everyday problem.

The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.

The CT16QD is a premium featured electric carpet brush ideal for every home and all carpet types. The computer balanced agitator runs on smooth bearing for extended life and is visible through the view window to confirm its operation when engaged. The reinforced long life poly-v belt eliminates vibration and noise and is further protected by a reset that engages should the agitator become locked during operation. Simply clear the object which prevents the agitator from spinning and hit the reset button to return to cleaning. The CT16QD delivers on the three most requested features in a brush. Excellent embedded dirt collection protecting your carpet, excellent surface grooming maintaining carpet appearance, and superior edge cleaning. The premium integrated telescopic electric wand is designed for use with the quick release feature of the CT16QD and mates to the electric hose. The hose end is designed to fit industry standard direct connect inlet valves. The 12” hard floor brush has a natural fill to protect wood floors and accessories for above the floor cleaning. The 93422 is suitable for use with all major brands of central vacuum including Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium.

The 90660 is an individually packed 50 foot low voltage hose and chrome button Lock stub tube. The hose also features soft grip handle with n style (Xs6) wall end. Our low voltage hoses are high quality, resulting in no kinks and great suction to go along with the excellent flexibility. The hose is silver in color, while the handle is black. This low voltage hose will fit into standard central vacuum inlet valves, providing suction to 1. 25 inch tools, wands, and attachments. Please not that this is a low voltage hose, and will not power electric power nozzles. This will work with standard central vacuum valves, but may not work with non-standard sizing without an adapter.

The #99680 Garage Vacuum Accessories Kit will fill all your needs for any job where you need strong tools that can take a beating.  It includes a 50 foot silver crushproof hose that fits into 1.25″ central vacuum outlets.  It also includes an entire range of accessory tools and a caddy bag to store them in. This package also is home to a high quality hose reel, making storage and reeling the hose back in after a hard job a piece of cake.

The Cen-Tec Systems 91464 50 foot x 1.375″ crush proof central vacuum hose comes with premium 360 degree swivel metal curved end with air relief and universal wall valve hose end. The uniquely produced hose is manufactured to maximize flexibility and insure superior air flow. The wall end allows compatibility with all central vacuums including Broan, No one, Beam, Vacumaid, Vacuflo, MD Manufacturing. The larger diameter, while still fitting all standard central vacuum inlets, allows for superior airflow and suction.

Cen-Tec’s 93642 is designed to provide the cleaning accessories most often requested in a low voltage central vacuum hard floor and general-purpose attachment set. The 1.375” x 35 foot hose is longer than the industry standard 30 feet to insure you reach everywhere in your home. A hose with an inner diameter of 1.375” insures superior airflow and improved cleaning performance that also assists the performance of air turbine tools often used with low voltage hoses. Further, the hose allows for switch control to turn the central vacuum on and off at the handle. A 12” natural fill floor brush and fully automatic combination nozzle address hard surfaces, area rugs, and even carpeted surfaces. A premium chrome ratchet telescopic wand with the easy release button down feature and a full set of premium above the floor accessories address upholstery, stairs, table tops, crevices, and baseboards. The tool caddy clip lets them travel with you while you clean. The 93642 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Hoover, Cyclovac, Vacuflo, Vacumaid, MD, M&S, Husky, Canavac, Honeywell, and well as most regional brands.

The 92960 central vacuum accessory set is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The CT20QD power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery which hales extend the life of your carpet, excellent surface grooming maintaining carpet appearance, and superior brushed edge cleaning. The lift time poly-v drive belt will provide years of reliable service and reduces noise and vibration. The 30 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers have communicated a preference for a hose sock to protect the investment in their home so the 92960 has a premium anti-microbial hose sock preinstalled. The direct connect hose end makes the 92960 compatible with all major brands of central vacuums installed with industry standard direct connect wall inlets including Beam, Electrolux, Eureka, Nutone, vacumaid, Cyclovac, vacuflo, Canavac, Husky, Star Power, MD, and Imperium. The 14″ wide CT20QD power nozzle has a chevron agitator design shown to provide superior cleaning performance. The Quiet Drive poly-v drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The Quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.

The 99713 is designed to provide superior airflow in a lightweight design to address the two features most desired in a central vacuum on/off control hose. The 360 degree swivel handle is designed to reduce kinking, stress on the hose, and stress on you as the user by relaxing any tension in the hose as you move through the room. The 35 foot length provides extra reach and insure there is sufficient length to prevent tugging and pulling to reach to the corner of the room. The installed hose sock is designed to reduce the possibility of marking walls, floor, or furnishings while also avoiding wear to doorframes and chair legs. The hose is compatible with industry standard central vacuum inlets including Nutone branded valves equipped with low voltage contacts in the opening of the inlet valve. You can confirm suitability by putting your finger into the hose opening and confirming there are two low voltage contacts on the upper surface of the opening. No need for concern as these contacts are low volt and will not harm you in any fashion. The 99713 is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands.

The #99702 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also included is an installed knit hose sock, which saves your furniture and furnishings from the wear and tear of the hose.

The CT16QD is a premium featured electric carpet brush ideal for every home and all carpet types. The computer balanced agitator runs on smooth bearing for extended life and is visible through the view window to confirm its operation when engaged. The reinforced long life poly-v belt eliminates vibration and noise and is further protected by a reset that engages should the agitator become locked during operation. Simply clear the object which prevents the agitator from spinning and hit the reset button to return to cleaning. The CT16QD delivers on the three most requested features in a brush. Excellent embedded dirt collection protecting your carpet, excellent surface grooming maintaining carpet appearance, and superior edge cleaning. The premium integrated telescopic electric wand is designed for use with the quick release feature of the CT16QD and mates to the electric hose. The hose end is designed to fit industry standard direct connect inlet valves. The 12” hard floor brush has a natural fill to protect wood floors and accessories for above the floor cleaning. The 93422 is suitable for use with all major brands of central vacuum including Beam, Electrolux, Eureka, Vacumaid, Vacuflo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium.

The 1.25″ (32mm) 99878 crush proof triflex vacuum hose is ideal for commercial and domestic vacuum applications including dry, wet-dry, central vacuums, extraction equipment and as a general use vacuum hose demanding excellent flexibility and a smooth interior for superior air flow. The 99878 hose accepts standard threaded vinyl cuffs and bent ends making it immediately compatible with commercial vacuum equipment, central vacuum inlets and standard vacuum wands metal and plastic. This triflex hose is orange in color.

The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.

The 93059 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93059 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.

The #99680 Garage Vacuum Accessories Kit will fill all your needs for any job where you need strong tools that can take a beating.  It includes a 50 foot silver crushproof hose that fits into 1.25″ central vacuum outlets.  It also includes an entire range of accessory tools and a caddy bag to store them in. This package also is home to a high quality hose reel, making storage and reeling the hose back in after a hard job a piece of cake.