546 reviews analysed
1. VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Low Voltage Protection for Dash Cameras
Feature
- Upgraded Automatically Detection Device – VanTop V9H hardwire kit will automatically detect the state of the car ignition to start recording video without a manual setting. An upgraded automatically detection device to make it easier to run a dash cam.
- Multiple Security Protection – With low voltage protection, V9H hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.6V/23.5V (it depending on your vehicle). More security protection like over-current, short-circuit, reverse connection, and overheat.
- 24 Hours Surveillance – With VanTop V9H hardwire kit, the continuous power supply makes parking monitoring function more reliable. Besides, supported by the time-lapse shooting function to maximize the advantages of memory.
- High Compatibility – VanTop V9H hardwire kit works for almost all car mini USB devices, such as dash cam, mirror dash cam, GPS navigator, and radar detector. Specially designed for VanTop H610/H609 mirror dash cam and more VanTop models.
- Easy Installation – You will get 1 x hardwire kit, 4 x fuse taps and blade fuses, 1 x easy pry tool, and 1 x quick guide. Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use.
Description
VanTop V9H Dash Cam Hardwire Kit
Specification
Input Voltage: DC12V/24V
Output Voltage: 5V-2.5A Max
Working Temperature: -40~160°F
Over-current Protection: 2.5A
Low Voltage Protection: 11.6V±0.2/23.5V±0.2
Connector Type: Mini USB
Cable Length: 3.5M/11.5FT
Package List
1 x Hardwire Kit
4 x Fuse Tap
4 x Blade Fuse
1 x Easy Pry Tool
1 x Quick Guide
TIPS
1)We strongly recommend the professional installation of the Hardwire Kit.
2)Please make sure the ignition is off before installing the Hardware Kit.
3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation.
4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle’s critical components, such as the Air Bags.
Installation Steps
Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires.
Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot.
Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on.
Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it.
Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.
2. APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras
Feature
- Fits for APEMAN C450 Series A – With Mini charging port converters, the kit is basically fit for Mini port Dash Cams or Car Charger like APEMAN C450 Series A
- Compatible 11.5–40V Vehicles – This Hardwire Kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, with wide range of input voltage(Voltage between 11.5-40V), suitable for most of car mini USB device on the market.
- Build-in G-SENSOR – The dash cam automatically shuts down 5 minutes after the car is turned off. At this time, the G-SENSOR in the OBD starts to work (in the monitoring state). Once the car is vibrated, the OBD will be powered on to turn on the recorder. When there is no vibration signal, the driving recorder will automatically shut down after 1 minute, which will save the battery.
- 24 Hours Parking Surveillance – The hard-wire kit connected to OBD-II connector of your car, can uninterruptedly supply power for dash camera for 24 hours. It can even supply Directly to the battery for constant 24hrs/7days power to protect against theft when your car is in the parking lot.
- Low Voltage Protection – With a smart low voltage protection system, the camera will power off automatically when the battery voltage lower than to 11.5V, thus preventing it draining the battery.
Description
APEMAN Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A
It’s a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.
APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam – C450 Series A or other Mini charging port car recorder.
Specifications:
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power
Installation Instruction:
1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.
Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.
3. SHISHUO Dash Cam Hardwire Kit – Mini USB and Micro USB Port 3.5m Cable with LP Mini/Mini/ATO/Micro2 Fuse, 12V to 24V Input, 5V Output for Dash Cam GPS Sat-Nav with Battery Drain Protection
Feature
- 3.5m hardwire kit for dash cam or other device powered by Mini USB port and Micro USB port, 5V/1.5A steady output, voltage input supports from 12V-24V
- Comes with Low-Profile Mini, Mini, ATO (Regular), and Micro2 fuse adapter, suitable for most cars. Leads come with protective sleeve to cover the crimps
- Make parking monitor for dash cams (should the device support) available, keeps it powered even after engine off
- Battery drain protection will cut off the power once the input voltage drops to under 11.6V (23.2V for 24V input), leaving enough power to ignite the engine
- 2-year warranty from SHISHUO. Worry free aftersales customer services.
Description
SHISHUO Dash Cam Hardwire Kit – Keep your dash cam powered even after engine off!
Dash cam product’s parking monitor function will require device been hardwired to car battery, that’s the best reason why you’ll need this hardwire kit!
This hardwire kit comes with 3.5m hardwire cable with Mini USB port and adapter cable to convert to Micro USB port, providing steady 5V/1.5A output. Big voltage input ranging from 12V-24V.
4 fuse adapter available, Low-Profile Mini, Mini, ATO (Regular), and Micro2, suitable for most cars. Each lead has a protective sleeve to cover the crimp, safer and more durable.
Featured with battery drain protection, power will be cut off once the input voltage drops to under 11.6V (23.2V for 24V input), ensure there’s enough power left to ignite the engine.
Package Content
1* Hardwire cable with Mini USB port
1* Mini USB to Micro USB adapter cable
4* Different types fuse lead
4* Different types fuse adapter
1* Crowbar 15* Cable clips
4. Meknic Dash Cam Hardwire kit Mini USB Port DC 12v/30v to 5V/2A Max Car Charger Cable kit,Low Voltage Protection for Dash Cameras (No Fuse Tap Cables)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Straight Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ For This Mini usb fuse kit,No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Dash Camera Hard Wire Kit
- ✅ Meknic Dash Cam Install kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Dash Camera Hard Wire With low voltage protection function, protect car’s battery, 12V-11.6V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers 24 months warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Camera Hardwire kit.
5. Meknic SV-PC01 Dash Cam Hardwire Kit with Battery Drain Protection System,2A Dash Cam Hardwire Fuse Kit For Car DVR Camera Or GPS Power Supply-Installation Manual Include (Mini USB)
Feature
- ✅ Meknic Dash Cam Hardwire Fuse Kit for car DVR recorder that Use Right Elbow Angle Mini USB,24 Hour Surveillance and Protects Against Battery Dying
- ✅ No need for cable from car cigarette lighter socket, replace it with a permanent hidden cable Installation in minutes with little to no expertise required. Simply piggy backs from car fuse box socket for Meknic Car Dash Cam Hardwire Fuse Kit
- ✅ Meknic Hardwiring Kit Use a Fuse Tap or Wire Tap to Draw Power From Fuse Block Or Wire, No damage to the original circuit of the car
- ✅ Meknic Cam Hardwire kit With low voltage protection function, protect car’s battery, 12V-11.2V(Cut Off Automatically) 24V-23.2V(Cut Off Automatically) to stop your car DVR working automatically
- ✅ Warranty: The company offers one year warranty and 100% satisfaction guarantee and 30-day, hassle-free return policy for Meknic Car Dash Cam Hardwire Fuse Kit.
6. Ssontong Dash Cam Hardwire Kit, Mini USB Port with Fuse,Low Voltage Protection, DC 12V – 26V to 5V/1.5A Max Car Charger Cable kit Micro USB Dashboard Camera Power Supply Car Charger GPS Car DVR Power
Feature
- Input Range: DC 12~24V Output Voltage: DC 5V, Output current: 2A Working Temperature: -40~ 160 Degree F
- 10 Foot hardwire kit for dash cam and other devices that use Mini USB. Our new kit set comes with Low-Profile Mini, Mini and ATO(Regular) Fuse Adapters. Some old model might only have ATO fuse kit inside
- 24 Hours Surveillance: The vehicle hard-wire kit connect to car battery or fuse box power, can realize continuous power supply for 24 hours. It can keep powered on even car turned off
- Low Voltage Protecting: With function of auto detect battery voltage and low voltage protecting, it can auto cut power output when it’s lower than 11.6V or 23.5V, make sure the vehicle can start normally
- Output Voltage More Stable: The vehicle hard wire kit with built-in precise switching power supply module, it can transform 12V(24V) to 5V, output voltage is more stable
Description
Specification :
Connector: Mini USB Connector
Input Voltage:12V-26V
Output Voltage:5V
Output Current:1.5A
Working Temperature:-40-160℃
ACC Signal for Parking Mode Product Quality Authentication:CCC Cable
Length:11.5ft
Low Voltage Protection: When lower than 11.6 V or 23.5 V automatic cut off
Package Included:
1.Dash Cam Hardwire Kit – Mini USB Simple
2 steps installation: 1. Plug the mini-USB end into dash cam. 2. For the other end connects with your 12/24v car electrical system, provide a seamless integration.
Warm tips:
– If you don’t have experience on installing the hardwire kits for the dash cam, please ask a professional for help.
– You may need a Blade Fuse Add-A-Circuit Fuse Holder for install to fuse box.
– This Hardwire kit for the Fuse Box is Low Profile Mini, Please check your car model before purchasing.
– If you have any problems , you could e-mail us directly by Amazon with order ID, we will reply in 24 hours, and we will always be here to solve your concern.
7. Dash Cam Hardwire Kit, Micro USB & Mini USB Hard Wire Kit Fuse for Dashcam, Dash Camera Charger Power Cord, (13ft)
Feature
- ★【Wide Compatibility】This hardwire kit is suitable for most car models(Voltage between 12-24V). Our hardwire kit Equipped Mini USB and Micro USB ports,works for almost all car mini USB & Micro USB ports device, such as dash cam、mirror cam、GPS navigator and radar detector etc(Not fits for Garmin device)
- ★【24 Hours Surveillance 】 The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24 hours. It can even supply power when the car is turned off.If the voltage of your car battery drops to 11.6V or 23.2V, the regulator will cut off the power,which leaves you with enough power to start your car
- ★【High Secure Standards】Input: 12v – 24v, Output: 5v 2A /Build in Dynamic IC Charge IC & Magnetic ferrite to prevent Electro-Magnetic shock,Low Voltage and Overcharge Protection, Overall 13ft hardwire kit can be installed basically on All vehicles. Input length: 3ft, Output length: 10ft.
- ★ 【 Package Contents 】Dashboard Camera Hardwire Kit ( mini USB & Micro USB ports) ,Fuse Tap Cable x4 , Installing crowbar x1 ,User Manual,
- ★ 【WARRANTY】45-Day Money Back Guarantee and 24-Month Product Replacement Warranty , Strict production management mode and high quality material let us to make the warranty
8. Dual Dash cam | VAVA Dual 1920x1080P FHD | Front and Rear Dash Camera | 2560x1440P Single Front| for Cars with Wi-Fi | Night Vision | Parking Mode | G-Sensor | WDR | Loop Recording| Support 128GB Max
Feature
- Dual 1080P Dash Cam: The front and rear camera simultaneously capture the road front (155°) and rear (126°) in crystal details at dual 1920x1080P 30fps. Or Single front camera provides you with a crystal clear QHD 2560x1440P@30fps video resolution.
- Dash cam with night vision: Utilize Sony sensor improves Exmor R’s low light sensitivity allowing clear imaging in low light environments and Image Signal Processing (ISP) technology to record a clear, visible video in any situation- day or night.
- Wi-Fi dash cam & VAVA Dash APP: With built-in Wi-Fi and VAVA Dash App (on Google or APP store), easily access to the configure, live stream, playback, download and share incredible HD video to the social media, such as Facebook, Instagram etc.
- Loop recording: Seamless Loop recording will be automatically activated when start the engine. Recorded videos are saved in 1 , 2 or 3-minute segments with an auto-looping mechanism. Support up to 128GB card( Class 10). Note: The 128GB Card not Included.
- Compact Design & Super Easy Installation: Low-profile design allows the VAVA Dash cam to be a well-hidden witness to the road ahead
- When plugged in, operates at 14°F-122°F. Using battery power (for the parking monitor), operates at 32°F-158°F.
Description
VAVA Dash cam features NT96663 CPU that records at 60 frames per second in 1080p resolution. And built-in Sony IMX323 CMOS image sensor provides crisp, smooth and wide footage, even in night.
9. Extractme Dash Cam Hardwire Kit, Micro USB Port/Mini USB Port, 8.5V-28V to 5V 2A Vehicle Hard Wires Kit Fuse for Dash Cam Cameras, Low Voltage Protection (10.5FT)
Feature
- ????【Dash Cam Hardwire Kit】DC 8.5V-28V. Output: 5V, 2A, for Mini-USB port or Micro USB port dash cam camera, Cable length: 10.5ft. Time Lapse records footage at a lower frame rate while reducing video size, to cover a longer period of surveillance.
- ????【24 Hours Surveillance】Extractme dash cam hardwire fuse kit connect to car battery or fuse box power can realize uninterrupted power supply for dash camera for 24 hours. Note: If you don’t need this function, please use YELLOW wire connect to ACC, RED don’t connect.
- ????【Low Voltage Protection】The hardwire installation kit power will be disconnected automatically when the voltage reaches below 11.6V, thus preventing it draining the battery, to make sure you have enough power to start the car.
- ????【Anti-Interference】Transform vehicles 12V/24V to 5V. And with anti-interference design, greatly reduce the vehicle hard-wires kit to the radio signal interference.
- ????【Wide Compatibility & Save Space】No longer requires connection to the car cigarette lighter socket, save space and make your car looks clean. This smart hardwire kit accepts voltage runs on 12-24V, works perfect for Car, Truck, Bus, Suvs.
Description
Dash Cam Hardwire Kit, Extractme 10.5FT Mini USB Hard Wire Kit Fuse for Car Dash Camera, 8.5V-28V to 5V 2A Hardwire Dash Cam Kit with Battery Protection
Installation Instruction:
1. Find Your Car Correct Fuse Slot
Please check your car’s manual and confirm your car fuse box location and open it.
2. Connect the Red Wire
Connect red wire to ACC(connect to on/off ignition switched fuse).
3. Connect the Yellow Wire
Connect yellow wire to always powered constant fuse.
4. Connect the Black Wire
Attach the ground cable to the bolt near the fuse box.
NOTE:
Whether your devices’ voltage is 12V or 24V, it will actomatically change to 5V 2A;
If you don’t have experience to install this hardwire kit by yourself, please ask for the professional.
Dash Cam Hardwire Kit Specifications:
> Input voltage : 8.5-28V input
> Output voltage: DC5V
> Output current: 2A
> Working Temperature: -22°F to 167°F (-30°C to 75°C)
> Product length: 10.5FT; product weight: 136g
> It compatible with any vehicle car DVR with Mini USB/ Micro socket for any dash cams
> Perfect for 24H parking surveillance
> Keeps your car organized (Connects your dash cam to the car battery)
> Protects your car battery from dying
> With low voltage protection function, protect car’s battery, lower than 11.6V(cut off automatically)
Packaging Include:
1 * Car Dash Camera Hardwire Kit
1 * Mini USB to Micro USB Cable
10. AUKEY Dash Cam Hardwire Kit with Motion Detection Sensor, Dashboard Camera Hardwire Kit for DR01, DR02, DRA1, DR02 J, DR03 & DR02 D Dual Dash Cameras, and More
Feature
- Dash Cam Upgrade: Maintain automatic monitoring of your vehicle when it’s parked and the ignition is off. Don’t leave your car unprotected
- 360° Protection: The inline sensor detects motion within 2–3m / 6.56–9.84ft in all directions. It instantly triggers the dash camera to capture any activity, and the dash camera automatically stops recording and stands by after 2–3 minutes if no further motion is detected
- Simple Setup: No electrical wiring or tools needed to install this kit. Plugs into the OBD-II DLC port under the dash (in all cars sold within the U.S. since 1996)
- Parking Mode Compatibility: Works with AUKEY DR01, DR02, DR02 D, DR02 J, DRA1 and many other mini-B dash cameras with parking mode (motion detection recording)
- Package Contents: AUKEY PM-YY Dashboard Camera Hardwire Kit, User Manual, 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty Card
Description
Dash Cam Companion
Investing in a dash camera is a smart choice for personal protection and insurance purposes, but most dash cameras power off when the car ignition is switched off, leaving your car unprotected. The AUKEY PM-YY Dashboard Camera Hardwire Kit maintains power supply to your dash camera, solving this problem.
Constant Car Protection
The PM-YY connects your dash camera to your car’s battery so the camera can receive power and record any activity after the ignition is turned off. To minimize battery draw in parking mode (motion detection recording), the inline motion detection sensor only activates the camera if motion is detected (within 2–3m / 6.56–9.84ft), and the camera enters standby again after 2–3 minutes if no further motion is detected. The hardwire kit’s 11.6V cutoff also prevents excessive discharge.
Hassle-Free Setup
Simply plug the connectors of this cable into the OBD-II DLC port of your car’s fuse box and the mini-B port on your camera. Use the 3M adhesive pad to fasten the motion detection sensor to your car’s windshield in seconds. No fuss with fuses or wiring.
Discreet Cable Management
The 10-foot hardwiring cable fits neatly and almost unnoticed in your car, elevating your dash camera to the next level with greater integration and functionality. Also, with a car charger port freed up, you have more ports to charge your devices. This hardwire kit is a small but powerful dash camera accessory for your AUKEY DR01, DR02, DR02 D, DR02 J, and many other dash cameras with mini-B power input port and parking mode.
45-Day Money Back & 24-Month Warranty
All AUKEY products are backed by our 45-Day Money Back Guarantee and 24-Month Product Replacement Warranty.
Conclusion
By our suggestions above, we hope that you can found Dash Camera Hardwire Kit Mini Usb for you.Please don’t forget to share your experience by comment in this post. Thank you!