Top 10 Ekwb Ekres X3 Liquid Cooling Reservoir

The EK-RES X3 250 RGB is a versatile multiport standalone RGB reservoir. The number inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process. EK-RES X3 series reservoirs are cylindrical standalone solutions, manufactured from premium quality 60mm acrylic tube and POM Acetal end caps in black color. An airtight sealing is ensured by quality EPDM rubber washers at both ends of the reservoir. With the total of six G1/4″ ports, the EK-RES X3 250 RGB reservoir make the filling, tube routing and draining, an easy task. The reservoir comes with a pre-installed anti-vortex insert and the capacity of the EK-RES X3 250 RGB variant is around 440ml of liquid. The package also includes a polyether anti-cyclone foam to optionally replace the acrylic anti-vortex insert. Compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. EK-RES X3 series reservoirs come with a pair of EK design reservoir holders using adjustable fastening force controlled by the enclosed Allen key.

Model: 3830046992970

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released previously. Compared to EK-Multioption RES X2 product line the EK-RES X3 reservoirs feature improved inlet/outlet port configuration for easier and more straightforward fitting configuration and tube routing. Improvements have been made on the reservoir’s bottom terminal which has been optimized for best flow. Vortex occurrence has also been diminished by the use of enclosed anti-cyclone as well as additional PE foam. All these new features result in easier-than-ever mounting, filling and quickest bleeding of air. Reservoir is manufactured of premium quality 60mm acrylic tube and POM Acetal end caps. The sealing is performed by quality EPDM rubber washers. New RES X3 comes with a pair of EK design reservoir holders using adjustable fastening force controlled by enclosed Allen key.

Model: 3831109841006

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released previously. Compared to EK-Multioption RES X2 product line the EK-RES X3 reservoirs feature improved inlet/outlet port configuration for easier and more straightforward fitting configuration and tube routing. Improvements have been made on the reservoir’s bottom terminal which has been optimized for best flow. Vortex occurrence has also been diminished by the use of enclosed anti-cyclone as well as additional PE foam. All these new features result in easier-than-ever mounting, filling and quickest bleeding of air. Reservoir is manufactured of premium quality 60mm acrylic tube and POM Acetal end caps. The sealing is performed by quality EPDM rubber washers. New RES X3 comes with a pair of EK design reservoir holders using adjustable fastening force controlled by enclosed Allen key.

Model: 3831109841020

EK-RES X3 150 Lite is a cylindrical standalone reservoir, manufactured from premium quality 60mm acrylic tube and POM Acetal end caps in black color. The sealing is performed by quality EPDM rubber washers. EK-RES X3 150 Lite reservoir is primarily made to be paired with EK-XTOP Revo Dual D5 with an enclosed EK-AF Extender Revo Dual D5 Add on. This is a small adapter fitting extender that mounts the reservoir to the EK-XTOP Revo Dual D5 and is not sold separately. The top of the reservoir features three G1/4″ threaded ports, while the bottom has one G1/4″ threaded port. This allows the reservoir to be used as a standalone reservoir in various positions, such as horizontal and vertical configuration. The inner face of the top comes preinstalled with one Acrylic tube that serves as a suction point in the horizontal position. Additionally, enclosed PE foam can be used to diminish vortex occurrence. The unit comes with a pair of special holders that allow the reservoir to be installed directly on the computer chassis.

Model: 3831109843208

Replacement tube for EK-RES X3 series reservoirs. Technical data: – Lenght: 104mm – Diamater: 60mm (OD) / 50mm (ID) – Material: acrylic glass May be use to upgrade or replace the tube on any of the following EK products: – EK-RES X3 – EK-DCP 4.0 X-RES – EK-DDC X-RES CSQ – EK-D5 X-RES CSQ – EK-D5 Dual TOP G1/4 CSQ in conjuction with EK-D5 X-RES LINK CSQ – EK-Dual DDC X-TOP CSQ in conjuction with EK-Dual DDC X-RES Link CSQ

All new Flat (FLT) series EK-Quantum Kinetic FLT D5 pump-reservoir units! The new Kinetic combo units are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation and a genuine D5 pump! Each unit is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of six G1/4“.

EK-Quantum Kinetic FLT D5 series pump-reservoir units are equipped with genuine D5 pumps, made in Europe, which are capable of delivering flow rates of 1500 liters per hour with a maximum head pressure up to 3.9 meters!

Alongside the reservoir is a black anodized aluminum cover under which the Addressable D-RGB LED strip is placed. Proper LED implementation is one of the main focus points of EK so that there are as few visible “LED hotspots” as possible.

Technical specifications:

– Size (HxWxT): 245x120x86mm (with the mounting system)
– Capacity: ~265ml
– D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)

Pump electrical and mechanical properties:
– Motor: Electronically commuted spherical motor
– Rated voltage: 12V DC
– Power consumption: 23W
– Maximum pressure head: 3.9m
– Maximum flow: 1500L/h
– Maximum system temperature: 60°C
– Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
– Power connector: 4-Pin Molex- and 4-Pin PWM FAN connector

Operational regime:

– PWM duty cycle: ~ 20-100%
– Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present

Enclosed:

– EK-Quantum Kinetic FLT 120 PWM D5 D-RGB
– Mounting mechanism with all necessary screws for 120mm fan mounting
– Pair of EK reservoir holders with mounting screws
– 4 × G1/4 Plugs
– 1 × Allen key for reservoir holders

Model: 3831109819791

EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.

The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and maximum flow of 250L/h and a very compact form

The EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.

The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of a quality acrylic material.

Model: 3831109813744

All new Flat (FLT) series EK-Quantum Volume FLT reservoir units! The new Volume reservoirs are part of the EK Quantum Line of products and come with sophisticated addressable D-RGB lighting implementation. Each reservoir is featuring standard 120mm fan mounting holes for maximum flexibility during the installation. The reservoir is equipped with a total of four G1/4“ ports so that users can choose the most optimal setup for their liquid cooling loops.

The new flat-shaped reservoirs are to revolutionize the way you were thinking about reservoirs and loop building. Since 120mm fan mounting patterns are the most dominant mounting options inside PC cases these days, these new EK-Quantum Volume FLT reservoirs will allow greater flexibility for installation since they don’t require drilling of new mounting holes on your case.

The reservoir is equipped with a total of four industry-standard G1/4″” ports, which can be, based on the orientation of the unit, used as inlet and outlet ports.

The reservoir is manufactured of premium quality acrylic material, machined to perfection, while the sealing is performed by a quality EPDM o-ring. Alongside the reservoir is a black anodized aluminum cover under which the Addressable D-RGB LED strip is placed. Proper LED implementation is one of the main focus points of EK so that there are as few visible “”LED hotspots”” as possible.

Technical specifications:

– Size (HxWxT): 360x120x53.5mm (with mounting system)
– Capacity: ~350ml
– D-RGB connector 3-pin 5V digital LED header (Pinout: +5V, D, Blocked, Ground)

Enclosed:

– EK-Quantum Volume FLT 360 D-RGB
– Mounting mechanism with all necessary screws for 120mm fan mounting
– Pair of EK reservoir holders with mounting screws
– 2 × G1/4 Plugs
– 1 × Allen key for reservoir holders

Model: 3831109819746

Replacement tube for EK-RES X3 series reservoirs. Technical data: – Lenght: 204mm – Diamater: 60mm (OD) / 50mm (ID) – Material: acrylic glass May be use to upgrade or replace the tube on any of the following EK products: – EK-RES X3 – EK-DCP 4.0 X-RES – EK-DDC X-RES CSQ – EK-D5 X-RES CSQ – EK-D5 Dual TOP G1/4 CSQ in conjuction with EK-D5 X-RES LINK CSQ – EK-Dual DDC X-TOP CSQ in conjuction with EK-Dual DDC X-RES Link CSQ