798 reviews analysed
1. Enokay Raspberry Pi 4 Model B Heat Sink Single Cooling Fan RAM Heatsink Set
Description
The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.
1.Fan Designed for Raspberry Pi 4B
2.Not included Raspberry Pi 4 Model B Motherboard
3.The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.
Packing included:
1.Raspberry pi 4B Single Cooling Fan
2.Black Aluminum Heatsink Set for Raspberry Pi 4B
2. LANDZO Raspberry Pi 3 B+ Dual Fan with Heatsink … (for 3B+)
Description
Raspberry Pi 3 B+ Dual Fan with Heatsink
3. iUniker Raspberry Pi 4 Fan, Raspberry Pi Dual Fan with Raspberry Pi Heatsink, Raspberry Pi Fan for Raspberry Pi 4 Model B, 3B+/Pi 3 B/Pi 2 B
Feature
- NOTICE: It can’t fit Retroflag Nespi Case and Case+, if you want use our dual fan in this case, you should modifiy the Retroflag Case and breaking the tabs on the single fan location.
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom size fan can fit most of the raspberry Pi case.
- Custom 3M heat conductive strip can make sure you Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
4. Enokay Raspberry Pi 2 3 Model B B+ Dual Fan with Raspberry Pi Heatsink for Raspberry Pi 2B 3B 3B+
Description
The Raspberry Pi Dual Fan Was Included the Thermal Conductive Adhesive.
1.Connecter of the Raspberry Pi Dual Fan: PH2.0-2P
2.Cable Length of the Raspberry Pi Dual Fan:8cm
3.Use For Raspberry Pi 3 Model B+
4.DC:5V 0.2A
5.Not included Raspberry Pi 3 Model B+ Motherboard
Packing included:
1.Raspberry pi Dual Fan
2.Black Aluminum Heatsink.
3.Copper Heatsink
5. iUniker Raspberry Pi 4 Case, Raspberry Pi 4b Case with Fan Raspberry Pi Fan Case with Raspberry Pi 4 Heatsink Raspberry Pi Heatsink for Raspberry Pi 4 Model B/Pi 3B+/ Pi 3B/ 2B
6. GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (2-Pack)
Feature
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 2x Cooling Fan, 2x Screw Set, 6x Heatsinks for Raspberry Pi 3B+, 8x Heatsinks for Raspberry Pi 4 Model B
- NOTE: Raspberry Pi Not Included
Description
Descriptions:
It used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
2x Cooling Fan
2x Screw Set
6x Heatsinks for Raspberry Pi 3B+
8x Heatsinks for Raspberry Pi 4 Model B
7. GeeekPi 4pcs Raspberry Pi 4 Quiet Fan, Raspberry Pi Cooling Fan 40x40x10mm 4010 Fan DC 5V 3.3V Brushless CPU Cooling Fan Cooler Radiator for Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B (Blue)
Feature
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- Fan Size: 40x40x10mm, Color: Bule Light
- Package Includes: 4x Cooling Fan, 4x Screw Set. 2Pack Version,please refer to Asin:B07X6DJZPX
- NOTE: Raspberry Pi Not Included
Description
Descriptions:
This is 4010 type fan for Raspberry Pi or other development board.
When the fan turns up, you will see Blue light
It’s high quality and low consumption and low noise.
Used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly
It’s good for heat dissipation of Raspberry Pi.
It can be assembled easily by screws.
Features:
4010 Fan
High quality
Low consumption
Super quiet
Easy to setup
How to connect:
Connect to 5V and GND on GPIO Pins
PS: You can also move the red wire to 3V3 pin to reduce the speed of the fan.
Package Includes:
4x Cooling Fan
4x Screw Set
NOTE:
Raspberry Pi Not Included
8. iUniker Raspberry Pi 3 B+ Case, Raspberry Pi Fan ABS Case with Cooling Fan, Raspberry Pi Heatsink, Simple Removable Top Cover for Pi 3 B+, Pi 3 Model B, Pi 2 Model B (Black for 3B+/3B)
Feature
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 30mm Large Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 3 Model B+ / Pi 3B
9. Raspberry Pi Fan, BCZAMD Raspberry Pi DC 5V 3.5V Cooling Fan Brushless 2Pin Heatsink Cooler 30 x 30 x 7MM for RPi Zero/Zero W/Pi 2/Pi 3/3B+, for RetroFlag NESPI Case, Orange Pi 3D Printer Part, 4Pcs
Feature
- This cooling fan is for raspberry pi.
- You can choose 5v or 3.3v by connect different pins on raspberry pi.
- The raspberry pi cooling fan work almost noiseless in 3.3V, and with little sound in 5V.
- The wind power is stonger in 5V.
- Use for: Raspberry Pi 3 B+/3/2/B+, for NESPi Case, for Orange Pi or other robot project and development boards.
Description
We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineers of technical team will always support you here.
After-sales guarantee:
each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specifications:
1. Size: 30 x 30 x 7 mm
2. Voltage: DC 3.3V 5V to choose
3. Current: 0.18A
4. Wire Length: 2.6 inches (66mm)
5. Connector: One-to-Two pin
Package includes:
4 x RPI Fan Cooling
Nuts M2.5, Screw M2.5 * 14mm not included!!!
10. GeeekPi Raspberry Pi 3 B+ Cooling Fan, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 3B+ (B Plus)
Feature
- Compatible with Raspberry Pi 3 B+（B Plus）
- It’s compatible with most of cases in the market
- Use CNC Machining manufacturing technology for Aluminum heatsink
- With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation
- The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board
- NOTE:Raspberry Pi Board Not Included!
- Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink, 2x Thermal Tapes
Description
Extreme Cooling Fan Kit For Raspberry Pi 3B+
Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.
Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes
Conclusion
By our suggestions above, we hope that you can found Hearsinks And Cooling Fans For Raspberry Pi for you.Please don’t forget to share your experience by comment in this post. Thank you!
