733 reviews analysed
1. BACOENG Vacuum Pump & Manifold Gauge Set – HVAC A/C Refrigeration Kit – Diagnostic R12 R22 R134a R410A – w/Case
Feature
- Gauge Set — 2 Valve Manifold with sight-glass & 1/4″ SAE fittings anodized aluminum block body, oversized sight-glass for easy viewing the refrigerant flow high quality gauge and high accuracy of reading
- Vacuum Pump – Newly Designed Compact Vacuum Pump, Portable and Stronger. Flow rate: 3.6CFM Power: 1/4HP Ultimate Vacuum: 0.8Pa
- Accessory–3 × 4FT Blue Red Yellow Refrigrant Hose,2 × 1/4″ SAE Male to 5/16″ SAE Female Adapters(R410a), 1 × Toolkit, 12oz Vacuum Oil, 1 × Manual for Pump and Gauge
- Hose– All hose are complied with SAE-J2196 standard standard. Hose Working pressure: 800PSI-4000PSI Acceptable refrigerant: CFC HCFC and HFC
- Multi-function Gauge– Ideal for R12 R22 R134a(Need Additional Quick Couplers) R410A R407C. Pressure and Temperature Displayed.
2. Kozyvacu Mini Split/HVAC/AUTO AC Repair Complete Tool Kit with 1-Stage 4.5 CFM Vacuum Pump, Manifold Gauge Set, Hoses and its Acccessories …
Feature
- A Complete refrigerant changing tool kit for R410a, R134a, R134, R134A, R12, R22, R22A, R404A, R407C or R502. Especially designed for Mini-Split and HVAC system.
- [Gauge] Blue gauge (low): 2-1/2″ diameter, 0-500 PSI
- Red gauge (high): 2-1/2″ diameter, 0-800 PSI. Max working pressure: 800PSI, Burst pressure: 4000PSI.
- [Three Colored Hoses] Brass ‘Quick Seal’ fittings – 45 degree on one end, straight on the other – providing a leak-free seal. Sets of 60 inch long, 1/4 inch yellow, blue, and red hoses
- 800 PSI working pressure
- 4000 PSI burst pressure,
- [Vacuum Pump] High performance vacuum pump with high torque design for easy startup and efficient operation and a Die-Cast Aluminum Housing. Cast aluminum housings make the pumps lightweight, yet durable. Easy to start and maintenance free, the thermally protected motor is durable for long time duty. While a AC system requires 500micron ultimate vacuum, Kozyvacu TA450 delivers better than 150 micron to ensure the vacuum meets your requirements.
- [Complete Set] Full complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, includes 1) A pressure gauge set 2) Three colored hoses, with length of 4 ft, Red:1/4”-1/4” 3) Two ¼ to 5/15 converters 4) 1x Can tap, 5) ¼ Flare male to ½ ACME female convert. 6) 1 x TA450 Vacuum Pump, 7) One bottle of Vacuum Pump oil.
3. XtremepowerUS 3CFM or 4CFM Air Vacuum Pump HVAC A/C Refrigeration Kit AC Manifold Gauge Set (3CFM 1/4HP Air Vacuum Pump)
Feature
- SIMPLE BUT POWERFUL: XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use.
- HEAVY DUTY CASING: Die-cast Aluminum Alloy Casing enables the vacuum pump be light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling.
- EASY OIL CHANGE: The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oil.
- INCLUDED: Multicolored set of three 36” hoses, Manifold Gauge, Oil Bottle, Accessories and Storage Bag to keep equipment clean and dust free.
- The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R134, R134A, R12, R22, R22A, R404A, R407C or R502
- also commonly used for wine degassing and automatic milking.
4. Robinair (15500) VacuMaster Economy Vacuum Pump – 2-Stage, 5 CFM
Feature
- Robinair’s VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service
- featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet
- 5 CFM free air displacement
- factory rated to 35 microns
- 1/3 HP, 115V/60 Hz thermally protected motor
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 inch MFL & 3/8 inch ACME inlet fittings, 3/8 inch FFL x 1/2 inch Acme adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining
5. Robinair (15300) VacuMaster Economy Vacuum Pump – 2-Stage, 3 CFM
Feature
- Robinair’s VacuMaster Economy Vacuum Pump is designed for air conditioning and refrigeration service, featuring a 2-stage rotary vane design, 7.5 ounce oil capacity, and non-skid feet
- 3 CFM free air displacement
- factory rated to 35 microns
- 1/3 HP, 115V/60Hz thermally protected motor
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 and 3/8 inch MFL inlet fittings, 3/8 inch FFL x 1/2 inch ACME adapter, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining
Description
Product Description
Robinair’s No. 15300 VacuMaster Economy Vacuum Pump is a high performance, heavy duty 2-Stage rotary vane design vacuum pump designed for air conditioning and refrigeration service. With a 3 CFM free air displacement, factory rating to 35 microns, and 7.5 ounce oil reservoir, this unit has the capacity you need to get the job done. This robust unit features a 1/3 HP, 115V/60Hz thermally protected motor; an inlet fitting engineered for maximum airflow while preventing oil backflow; finned aluminum surfaces that dissipate heat faster (keeping pump cooler and extending life); 1/4″ and 3/8″ male flare inlet fittings; 3/8″ female flare x 1/2″ ACME adapter; easy to read sight glass; easy access oil fill port; oil drain valve positioned at the bottom of the oil reservoir and angled for faster, more complete draining; and non-skid feet. Oil included. Robinair, a Bosch Automotive Service Solutions brand, is a global leader in service tools and equipment based in Owatonna, Minnesota. Robinair is recognized throughout the world as the quality and performance leader in AC/R evacuation tools and this position has led to its success with the full range of products that serve the heating/ventilating/air conditioning/refrigeration (HVAC-R) and mobile markets, which includes the automotive aftermarket along with other industries such as agriculture and construction.
From the Manufacturer
115 volt, 2-stage design. 1/2″ ACME and 1/4″ MFL intake fitting. No-hassle over-the-counter replacement warranty.
6. Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE
Description
New R410A Ductless Mini Split Systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system (i.e. R22). This new port size is 5/16″ SAE and some gauge sets carry 1/4″ SAE connectors. Port adapter converts the 5/16″ SAE ports to use with 1/4″ SAE gauge sets.
7. pioneer air conditioner Decorative PVC Line Cover Kit for Mini Split Air Conditioners and Heat Pumps – WYS-LCVR-KIT
Description
Finish up your ductless mini splut unit installation for a professionally installed look. Protects the line set, wiring and drainage lines from weather and other elements. Can be added on to new or existing installations. Suitable for 9000, 12000, and 18000 BTU systems. Parts included : a. Three straight lengths of 32 inches each. b. Two different types of 90 degree elbows. c. One wall cap for entry point. d. One reducer, and two couplings. e. One 20” flexible length, for condenser connection. f. One 24” flexible length. g. Plastic anchors, screws and cable ties. h. Total coverage up to 13 feet.
8. BingSnow 6 Pcs R410a Mini Split Adapter Charging Vacuum Port Adapter Brass Converter with 5/16" Female Quick Couplers to 1/4" Male Flare for Mini Split HVAC System
Feature
- 【Material】Made by high quality pure copper, last long. Easy to operate and install, strong sealing for durability and safety.
- 【convenient】With 45 angle on the service port site for easier access.
- 【Compatible】Used on most newer R410A ductless mini split systems. Perfectly fits for R410a mini split system air conditioners, HVAC and refrigeration service.
- 【Design Skill】In the course of the operation, the thimble will not open the air conditioning core tube, completely solve the problem of fluoride leakage injury, security is guaranteed.
- 【Package】6 x R410a adapter with 6 x PTFE gasket and protective covers,6 x rubber gasket(Extra bonus).
Description
Specifications:
Material: Pure copper
Connectors: 5/16″ Female Quick Couplers to 1/4″ Male Flare
Thread diameter: 0.47 inch(12 mm)
Thread size: 11mm
Total size: diameter: 0.63 inch/ 16 mm, 2.09 inch(53 mm)
Features:
In the course of the operation, the thimble will not open the air conditioning core tube, completely solve the problem of fluoride leakage injury, security is guaranteed.
Brass construction, quick connect, good tensile strength, resisting corrosion and AC low-loss fitting.
Complete package:
6 x R410a adapter with 4pcs PTFE gasket and protective covers.
6 x green rubber gasket(Extra bonus).
Notice:
The material of this product is pure copper. The surface is changed into brass after copper was oxidized.
Due to manual measurement, please allow a slight deviation in size.
Please carefully align with the model you need to purchase. The R410A mini split system is usually equipped with different charging port sizes to avoid loading the wrong refrigerant into the system (such as R22).
9. Senville HL-550 Wall Mounting Bracket Mini Split Air Conditioner, 18000 BTU-36000 BTU, Beige
Feature
- Heavy duty design with L-bracket and horizontal support beam to support over 350lbs
- Compatible with most mini split air conditioners, and adjustable to support mini split systems between 9000 BTU and 36000 BTU.
- Includes all hardware for complete assembly, rubber vibration rings, and expansion bolts.
- Designed to keep your mini split elevated, away from dirt, grass-clippings, and snow.
Description
This heavy duty wall mounting bracket for mini split air conditioners is designed for air conditioners sized between 9000 BTU and 36000 BTU. Includes built in level, as well as L-Bracket with horizontal support beam for additional support. Designed to be compatible with most mini split air conditioners and heat pumps.
Conclusion
By our suggestions above, we hope that you can found Vacuum Pump Kit For Mini Split for you.Please don’t forget to share your experience by comment in this post. Thank you!