Top 10 Water Chiller Cooling System

Active Aqua Chillers are ideal for keeping the nutrient solution in your reservoir at the perfect temperature. Each unit has a user-friendly temperature system that allows you to control your desired temperature range as needed, & all models now have a boost function that accelerates the chilling process for quicker establishment of desired nutrient solution temperature.Rated Wattage : 510

This is the ideal cooling solution for small aquariums. This quiet, reliableefficient chiller uses advanced thermoelectric technology to directly convert electricity into cooling power. Can be easily bulkheaded through a 1 1/4″. hole into siphon overflows, prefilters, sumps or even directly into plastic aquariums.Provides continuous chilling when plugged in to a power source, it does not have an on/off switch. A separate temperature controller must be used to turn the device on or off at pre-determined temperatures. A single IPAC-50W chiller can cool 10 gallons of water 6F to 8F,20 gallons of water 3F to 4Fand 40 gallons of water 1F to 2F below ambient air temperature in a standard aquarium. For greater cooling multiple units can be used.

Product description:

Name:420W 6-Chip Semiconductor Air-Conditioning DIY Radiator Kit
Material: metal
Size：160*60*60mm
Voltage：12V

Power:420W( 6-Chip） In the case of 15.4V
Electric current：36A
Steady current:27A

Red line: "+" , Black line: "-"
Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, sealability ,etc…
Use:

Small space cooling, learning the principle of semiconductor refrigeration, the company developed cooling equipment research, pet air-conditioning, etc., use to cool down where you need.
Package include:

1 X Cooler

Note:

* This product is a DIY component,No Installation Guides Are Included, Professional installation is strongly recommended！！！
* Package only include the peltier cooler, other accessories not include.
* Due to the manual measurement,there might be some error.

Maintain optimum water temperature by lowering the water temperature of your tank digital led temperature display control accurately maintains desired temperature anti-freezing system will not allow the heat exchanger to freeze memory recall – thermostat returns to last set temperature in the event of power outage high BTU rating (heat removal) – uniquely designed heat exchanger provides 25% BTU per watt advantage over other chillers corrosion resistant titanium heat exchanger for efficient cooling powerful reliable compressor uses DuPont ozone friendly cooling agent automatic power surge shut-off & memory temperature recall system energy savings – highly efficient condenser uses less energy removable front condenser grill/filter for easy cleaning quick easy set-up & cleaning maintenance.

CW-3000 Industrial Water Cooling Chiller for CO2 Laser Tube Engraver Cutting Cutter Item Info: This water chiller is designed for cooling the spindle of the cnc engraving machine, applied to cool a single 80W or below CO2 laser tube (emitting rate lower than 60%) This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable Technical Datas: Voltage: AC 100-120V Frequency: 50Hz Current: 0. 45A Radiating capacity: 50W/℃ Tank capacity: 8L Maximum Pumping Lift: 10M Maximum Flow: 10L/min Protection: Flow alarm Inlet and outlet: External Dia. 10mm brass connector Way of Circulation: Water pump forces circulation Cooling: Radiator that forces the wind cooling Feature: Comprehensive reference to the international radiator – type cooling system Small thermolysis water cooler With completed water flow and over high temperature alarm functions Enclosed water tanks Professional forced air – cooled radiator Equipped with alarm output port Multiple power specifications; CE approval; RoHS approval Advantages: CW-3000 laser water chiller is suitable for small water cooling device Provide stable working conditions for laser devices Water can be used for a long time High heat dissipating capacity and not easy to be blocked Alarm output port can quickly protect sensitive components Package Content: 1 x CW3000 Water Chiller Machine 1 x Power Cable 1 x Spare Fuse 1 x User Manual 1 x Alarm Signal Output Plug 2 x Sealing Washer Note: This machine does not have a cooling function, only to heat dissipation

FREE SHIPPING UPS TO 48 STATES – Chiller Daddy is a high output, heavy duty under sink drinking water chiller for home or office. Great for use with a Reverse Osmosis RO System or under sink drinking water filter system. Easy to install. Whisper quiet 3-way noise suppression system. SUS304 Stainless Steel inside and out. Even the nuts, bolts, screws, washers, cabinet and drain cap are stainless steel. Premium quality in every detail. Chiller Daddy makes perfectly chilled water for big thirsts. Adjustable Water Thermostat 42F – 54F – Factory Preset For Normal Use – Perfectly Refreshing Drinking Water Temperature Range Hygenic Stainless Steel Cold Water Tank, Drain Cap & In/Out Tubes – 100% Stainless Steel Waterway males it the best choice for the high purity of reverse osmosis water Attractive Appliance Grade 304 Stainless Steel “NO-RUST” Exterior Cabinet Long Life, Hermetically Sealed, High Efficiency Compressor Auto Overload Protection – Thermally Protected Motor-Compressor Fast 1.32 GPH Flow Rate – Quick Recovery Dual Evaporator Grid For Silent and Efficient Convection Water Chilling. Conforms to UL Standard 399. Certified to CSA Standard C22.2 #s 60335-2-24 & 60335-1Easy to Install on RO Reverse Osmosis and Filtered Drinking Water Systems. Enough cold water to give you brain freeze on a hot day!

What Can Petzilla Cooling Fan Do for Me?

During summer, the aquarium tank easily gets hot enough to cook fishes. Petzilla smart cooler kit can reduce aquarium water temperature up to 2 to 4℃, and can also offer a couple degrees cooling to offset lights and UV filter. 2 variable speed and 0~90°adjustment. If you are not going to spend over $200 to purchase a chiller system for dramatic decrease in temperature, this Petzilla cooling fan is a great little investment for warm aquariums.

How Many Fans Do I Need?

A detailed size chart in image for your reference. It takes time for it to get the tank down there. You might choose 1 SIZE UP or add a bottle of frozen water, if you want better cooling effect and need to drop the aquarium temp faster. If the indoor temperature is pretty high, or you have aquarium of bigger size and want better ventilation, maximize air movement in an enclosed area with two cooling sets instead of one unit, you can DIY a effective temp controller.

What Should I Do If It Doesn’t Work As Expected?

We offer 30-day Money-back Guarantee & 1-year Warranty & Free User Support. If it doesn’t working as expected, let us know indoor both temperature and size of your tank (dimensions and capacity), we will definitely help get our products to work properly. We take care of all quality-related issues with a replacement or full refund. Please CONTACT US for any problem.

Note:
1. Make sure the thickness of your aquarium wall (or the width of the lip around the aquarium top edge) is LESS THAN 0.5".
2. No worry about the adapter outlet. We notice your concerns and the adapter is as shown in the image.
3. Be careful and don’t push too hard when installing in case of damage to the aquarium and cooling fan.

Specification:
Model: Aquarium Water Chiller or Warmer and Cooler
Color: White, Green , Blue
Input AC: 110-240V , 50/60HZ
Power: 72W
Water Flow : 1-3L/min
Hmax: 3meters
Suit For Tube: 8mm Inside Diameter
Size: Approx. 11x11x19cm
Suit For Tank: Less than 20L/5GAL
Package include:
1 x Aquarium Water Chiller OR Warmer and Cooler
Comes with a mini plug adapter.

Decreases the pool water temperature 8-10 degrees. Operating cost is Zero. Easy installation and removal, does not require glue, just slip. Runs with in-ground pool. Energy efficient . Kids love its mist curtain a lot. Increase the life of pool liners Will fully functional in less than 30 seconds.